Amazon Finds · Updated November 19, 2026

Best Car Phone Mounts
Top 10 on Amazon

Our #1 pick is the iOttie Easy One Touch Signature. We compared 10 car phone mounts on Amazon that grip a phone in a thick case: vent hooks, dash and windshield clamps, cup holders, a CD-slot mount, one MagSafe mount and one wireless charger.

How we picked: we shortlist by Amazon Best Seller rank and number of ratings, then compare published specs. We don’t test these products hands-on.

By Jamilur Rahman, Founder & Editor · Updated November 19, 2026

  • Owner reviews checked
  • Features side by side
  • Quick & easy compare
  • Smarter purchase
iOttie Easy One Touch Signature

The short answer

For most drivers, the iOttie Easy One Touch Signature is the car phone mount to buy. The listing says its universal cradle fits phones and cases of any size, so a thick protective case is not a problem. One press on the trigger button closes both arms around the phone with one hand, and a telescopic arm (5 to 8 inches) lets you pull the screen toward you. It suits anyone who wants a grip-anything clamp on a flat dash or windshield.

Where you mount it matters as much as the brand. If you would rather use a vent, the Miracase is the most-reviewed hook mount here and the LISEN is the one built for the bulkiest cases. Cars with round vents or no spare vent should look at the APPS2Car cup holder mount, and older cars with an unused CD slot are well served by the APPS2Car CD-slot mount. For wireless charging, the ZeeHoo auto-clamp is the pick, and iPhone owners who want to snap the phone on with a magnet should take the Belkin MagSafe vent mount. If you want to spend as little as possible, the LISEN, Miracase and APPS2Car CD mount all sit in the $10–$20 band.

Skip the iOttie Signature if your dashboard is leather, curved or heavily textured, or if your car bakes in the sun all day. Any suction cup can slip in those conditions, and a vent, cup-holder or CD-slot mount is the safer choice. Also skip the dash and windshield options if you live in a state that limits what you can fix to the windshield: check your local rules first. And skip the magnetic and wireless picks if your phone is not an iPhone with a MagSafe case or a Qi-ready phone: the clamps work with any phone.

Many ranking pages give no price band, no clear budget pick and little on who each mount is for, and few of them cover cup-holder and CD-slot mounts for cars with round vents or no vents at all. This page does. How we picked: we read owner reviews and listing specs for the popular mounts on Amazon, then compared them side by side on mount type, phone width and case fit, charging and one-hand use. We don’t claim lab tests: these picks reflect listing specs and real owner experience. Checked November 2026.

Black Friday is Nov 27, Cyber Monday is Nov 30

Before you buy, see which Amazon deals are real. We check each one against its price history.

Compare them side by side

Everything that matters, in one table. Swipe to see all 10.

Product
iOttie Easy One Touch Signature
Best Overall
iOttie Easy One Touch Signature
Dash and windshield clamp
View on Amazon
LISEN Thick-Case Vent Mount
Best for Thick Cases
LISEN Thick-Case Vent Mount
Vent hook clamp
View on Amazon
Miracase Metal Hook Vent Mount
Best Vent Mount
Miracase Metal Hook Vent Mount
Vent hook clamp
View on Amazon
APPS2Car Cup Holder Mount
Best Cup Holder Mount
APPS2Car Cup Holder Mount
Cup holder mount, long arm
View on Amazon
VANMASS 3-in-1 Suction and Vent Mount
Best Value Suction Mount
VANMASS 3-in-1 Suction and Vent Mount
Dash, windshield and vent mount
View on Amazon
iOttie Easy One Touch Advanced Vent Mount
Best One-Touch Vent Mount
iOttie Easy One Touch Advanced Vent Mount
Vent clamp, rubber prongs
View on Amazon
APPS2Car CD Slot Mount
Best for CD Slots
APPS2Car CD Slot Mount
CD-slot mount
View on Amazon
TECKNET Cup Holder and Vent Mount
Best 2-in-1 Cup and Vent
TECKNET Cup Holder and Vent Mount
Cup holder mount with vent clip
View on Amazon
Belkin Magnetic Vent Mount Pro
Best for MagSafe iPhones
Belkin Magnetic Vent Mount Pro
MagSafe vent mount
View on Amazon
ZeeHoo Wireless Charging Auto-Clamp
Best Wireless Charging Clamp
ZeeHoo Wireless Charging Auto-Clamp
Wireless charging clamp
View on Amazon
BeastScore
93 / 100
91 / 100
90 / 100
89 / 100
88 / 100
87 / 100
86 / 100
85 / 100
84 / 100
83 / 100
Best forThick cases on a flat dash or windshieldRugged cases on a budgetA proven vent mount for most phonesRound vents or cars with no spare ventOne mount for the dash, windshield or a ventEasy one-touch grip on a ventOlder cars with an unused CD slotBig phones in thick cases, with two ways to mountiPhone owners who want to snap the phone onWireless charging in a clamp, not a magnet
Typical price (checked November 19, 2026)$20–$30$10–$20$10–$20$20–$30$20–$30$15–$25$10–$20$20–$30$30–$40$25–$35
Mount typeSuction base + clampVent hook clampVent hook clampCup holder base + telescoping neckSuction base + vent hookVent clamp (rubber prongs)CD slot, three-side gripCup holder base or vent clipMagnetic vent mountAuto-clamp, suction base + vent clip
Phone width / case fitPhones and cases of any size (listing)4 to 7 in phones, case up to 1.09 in4.0 to 7.2 in phones, “thicker cases”4.0 to 7.0 in phones, bulky cases4 to 7 in phones, phone + case up to 0.55 in2.3 to 3.5 in wide, including caseCases up to 0.8 in thick2.08 to 3.74 in wide, thick cases OKiPhone 12 to 17 and MagSafe casesSee listing
ChargingNo (cable tab)NoNoNo (open tray for a cable)NoNo (cable organizer)No (base leaves room for a cable)NoCable clip for wired charging (see listing)Qi: 7.5W iPhone, up to 15W some phones
One-hand useYes, one-touch armsSee listingYes, quick-release buttonYes, single-button releaseSee listingYes, one-touchYes, one-press releaseYes, one-touch releaseYes, magnet snapYes, auto-clamp sensor
Key features
  • Cradle fits phones and cases “of any size”
  • Telescopic arm extends 5 to 8 inches
  • Magnetic tab keeps the charging cable tidy
  • Case up to 1.09 inches thick (listing)
  • Double-layer metal hook meant to protect the vent
  • Fits horizontal and vertical vents
  • Steel hook with silicone pad grips one vent blade
  • Quick-release button for one-hand use
  • 360-degree head for portrait or landscape
  • Neck extends 8.5 to 11 inches
  • Base expands from 3 to 4 inches
  • Leaves the dash, windshield and vents untouched
  • Large suction cup plus a vent hook in the box
  • Adjustable feet from 0 to 0.78 inches
  • Also works on a desk or kitchen counter
  • Easy One Touch trigger for one-hand loading
  • Extra support foot against drooping
  • Rubber prongs, no metal hook on the vent
  • Screw-locked base holds in the CD slot
  • Grips the phone on three sides
  • Clears the windshield view
  • Cup base expands from 2.75 to 4.52 inches
  • 11-inch aluminum gooseneck
  • Vent clip included for a second mounting option
  • MagSafe-compatible for iPhone 12 to 17
  • Portrait or landscape viewing
  • Built-in cable management
  • Arms close when you set the phone down
  • Suction base, dash disk and vent clip in the box
  • Capacitor lets you release the phone after the engine is off

BeastScore here is our overall rating out of 100, based on published specs and Amazon owner reviews. Prices change daily, so tap "View on Amazon" for today's price. We may earn a small commission, at no extra cost to you. Learn more

Every pick, explained

Why each one made the list

What each pick does best, where it falls short, and the typical Amazon price when we checked.

  1. 1. Best Overall

    iOttie Easy One Touch Signature

    BeastScore 93 / 100Typically $20–$30 on Amazon (checked November 19, 2026)

    The Signature wins because it is the one mount here that lets you stop worrying about your case. The listing says the cradle fits smartphones and cases of any size, and the Easy One Touch button closes both arms with one hand. A 5 to 8 inch telescopic arm and a 260-degree pivot let you pull the screen closer or push it back on a deep dash. It is one of the best-reviewed mounts on Amazon. Like any suction cup, it needs a clean, flat spot: skip it for leather or heavily textured dashboards, or for a car that sits in strong sun.

    Pros
    • Clamp grips phones and thick cases of any size
    • One-handed release with a single trigger button
    • Long telescopic arm and 260-degree pivot
    Cons
    • Suction base can slip on textured or leather dashboards
    • Uses a dash or windshield spot, which some states restrict
    • Bulkier than a vent hook
  2. 2. Best for Thick Cases

    LISEN Thick-Case Vent Mount

    BeastScore 91 / 100Typically $10–$20 on Amazon (checked November 19, 2026)

    LISEN is the pick when your case is the problem. The listing says the clamp holds phones from 4 to 7 inches and a case up to 1.09 inches thick, the deepest grip on this page, and it uses a double-layer metal hook designed to avoid scratching the vent. The hook length is adjustable and the support ring rotates, so it fits horizontal and vertical vent slats. Owners rate it well for the money. It does not work on round vents, a heavy phone can make thin slats sag, and the listing is silent on one-hand release, so try the clamp before you drive.

    Pros
    • Deepest case grip here, up to 1.09 inches
    • Adjustable metal hook for horizontal or vertical vents
    • One of the cheapest mounts on the page
    Cons
    • Round vents are not supported
    • Heavy phones can droop on thin vent slats
    • Listing does not say how easy the one-hand release is
  3. 3. Best Vent Mount

    Miracase Metal Hook Vent Mount

    BeastScore 90 / 100Typically $10–$20 on Amazon (checked November 19, 2026)

    Miracase is the vent mount with the biggest owner-review base on this page, and it is one of the most-reviewed phone mounts on Amazon. That is the reason to pick it: the design works in a lot of cars. The listing says a steel hook with a silicone pad catches one vent blade, the clamp takes 4 to 7.2 inch phones and thicker cases, and a quick-release button loads the phone one-handed. The hook fits blades up to about 1.4 inches wide, round vents are out, and the listing gives no case-thickness limit, so measure a rugged case first.

    Pros
    • One of the most-reviewed mounts on Amazon
    • Quick-release button works with one hand
    • Steel hook is meant to hold in harsh conditions
    Cons
    • Does not fit round vents or blades wider than about 1.4 inches
    • No stated limit for very thick rugged cases
    • Metal hook can mark soft vent slats
  4. 4. Best Cup Holder Mount

    APPS2Car Cup Holder Mount

    BeastScore 89 / 100Typically $20–$30 on Amazon (checked November 19, 2026)

    This is the answer for cars with round vents, no spare vent or a dash you do not want to stick anything on. The base expands from 3 to 4 inches to grip a cup holder, and a telescoping neck (8.5 to 11 inches) brings the phone up to eye level. The listing says the wide clamp arms take 4 to 7 inch phones in bulky cases and names the iPhone 17 Pro Max. Owners rate it highly. The long neck can sway on rough roads, it uses up a cup holder, and you should check the arm clears your gearshift.

    Pros
    • Needs no vent, dash or windshield spot
    • Listing names bulky cases and the iPhone 17 Pro Max
    • Expandable base fits a wide range of cup holders
    Cons
    • Long neck can wobble on bumpy roads
    • Takes over a cup holder
    • Arm may get in the way of the gearshift in some cars
  5. 5. Best Value Suction Mount

    VANMASS 3-in-1 Suction and Vent Mount

    BeastScore 88 / 100Typically $20–$30 on Amazon (checked November 19, 2026)

    VANMASS gives you three ways to mount in one box: a suction base for the dash or windshield, a hook clip for a vent, and a desk stand. The listing says the suction cup is 69 mm, the feet adjust from 0 to 0.78 inches and the arms hold 4 to 7 inch phones. It is very well reviewed. The limits are in the listing too: phone plus case must be 0.55 inches or less, so it is not for the thickest cases. The suction fails on leather dashboards, and the maker gives a 194°F limit and says to avoid prolonged direct sunlight.

    Pros
    • Suction base, vent hook and desk use in one kit
    • Very large review base with strong owner scores
    • Adjustable feet suit most phone sizes
    Cons
    • Case limit of 0.55 inches rules out the bulkiest rugged cases
    • Suction cup fails on leather dashboards
    • Listing warns against prolonged direct sunlight
  6. 6. Best One-Touch Vent Mount

    iOttie Easy One Touch Advanced Vent Mount

    BeastScore 87 / 100Typically $15–$25 on Amazon (checked November 19, 2026)

    Pick this when you want iOttie’s one-touch grip on a vent instead of the dash. The listing says the cradle takes phones and cases from 2.3 to 3.5 inches wide, which covers a large phone in a normal case, and an extra support foot stops the mount drooping under bigger, heavier phones. Rubber prongs grip horizontal and vertical blades, so there is no metal hook against the vent. Owner scores are high, but the review base is smaller than the Miracase. The 3.5-inch limit means a very bulky case may not fit, and the prongs suit standard vents only.

    Pros
    • One-touch arms load the phone with one hand
    • Support foot helps big phones stay level
    • Rubber prongs avoid a metal hook on the vent
    Cons
    • 3.5-inch width limit can block the bulkiest cases
    • Costs more than the hook mounts here
    • Smaller owner-review base than the Miracase
  7. 7. Best for CD Slots

    APPS2Car CD Slot Mount

    BeastScore 86 / 100Typically $10–$20 on Amazon (checked November 19, 2026)

    If your car has a CD slot nobody uses, this is a solid, cheap mount with no suction and no vent. The base locks into the slot with a screw, the clamp grips the phone on three sides and the listing says cases up to 0.8 inches thick are fine. Release is one press, and the base leaves room for a charging cable. With no suction cup or adhesive, nothing softens in the heat. But it is useless without a flat CD slot, the listing says it will not fit curved or hidden slots or slots close to the shifter, and it does not fit the Galaxy Z Fold.

    Pros
    • No suction cup, adhesive or vent hook to fail in the heat
    • Case limit of 0.8 inches handles most protective cases
    • One of the cheapest mounts on the page
    Cons
    • Only works if your car has a flat, reachable CD slot
    • Listing names several models it does not fit
    • Not compatible with the Galaxy Z Fold series
  8. 8. Best 2-in-1 Cup and Vent

    TECKNET Cup Holder and Vent Mount

    BeastScore 85 / 100Typically $20–$30 on Amazon (checked November 19, 2026)

    TECKNET is two mounts in one kit: a cup holder base that expands from 2.75 to 4.52 inches, and a vent clip, so you can switch if you change cars. The listing says the clamp holds devices 2.08 to 3.74 inches wide and works with a thick protective case, and the 11-inch aluminum gooseneck adjusts the height from 7 to 15 inches. That makes it a good fit for a large, heavy phone. The owner-review base is much smaller than the APPS2Car, a tall gooseneck can sway on rough roads, and you give up a cup holder to use it.

    Pros
    • Cup holder base and vent clip in the same box
    • Wide clamp for large phones in thick cases
    • Aluminum gooseneck adjusts from 7 to 15 inches
    Cons
    • Fewer owner reviews than the other top picks
    • Tall gooseneck can sway on bumpy roads
    • Takes over a cup holder in cup mode
  9. 9. Best for MagSafe iPhones

    Belkin Magnetic Vent Mount Pro

    BeastScore 84 / 100Typically $30–$40 on Amazon (checked November 19, 2026)

    Belkin is for iPhone owners who want to snap the phone on and off. The listing says it is MagSafe-compatible, covers the iPhone 12 through 17 series and certified MagSafe cases, works in portrait or landscape and has built-in cable management. It is the only magnetic mount in this list and the quickest to use, because there are no arms to open. The catch is the case: it needs a MagSafe phone or MagSafe case, so a thick case without magnets or an Android phone will not stay on. It costs more than the clamps, and the charging cable is sold separately.

    Pros
    • Snap on and off with one hand
    • Works in portrait and landscape
    • Cable management built into the mount
    Cons
    • Needs a MagSafe iPhone or a MagSafe case
    • Thick non-MagSafe cases and Android phones will not hold
    • Costs more than the clamps, cable sold separately
  10. 10. Best Wireless Charging Clamp

    ZeeHoo Wireless Charging Auto-Clamp

    BeastScore 83 / 100Typically $25–$35 on Amazon (checked November 19, 2026)

    ZeeHoo is the wireless charger for people who want a clamp, not a magnet. Auto-clamp arms close when you set the phone down and open with a press on either side, and a built-in capacitor means you can still release the phone after the engine is off. The listing says charging runs at up to 15W on some phones, 10W for Samsung and 7.5W for iPhones, and it needs a QC 3.0 car adapter that is not included. The box holds a suction base, a dash disk, a vent clip and a USB-C cable. iPhone charging is capped, and charging through a thick case is weaker, so check the case.

    Pros
    • Auto-clamp arms close as you set the phone down
    • Qi wireless charging in the same mount
    • Suction base, dash disk and vent clip all included
    Cons
    • iPhones charge at 7.5W at most
    • Needs a QC 3.0 car adapter that is not included
    • Wireless charging is weaker through a thick case
Quick view

All 10 compared, in one look

See every pick on one chart, or tap one to put it head to head with iOttie Easy One Touch Signature. Ratings out of 10 are our estimates from published specs and Amazon owner reviews, not hands-on tests. Bigger shape = better.

GripThick-case fitOne-hand useEasy setupStabilityValue
iOttie Easy One Touch SignatureLISEN Thick-Case Vent MountMiracase Metal Hook Vent MountAPPS2Car Cup Holder MountVANMASS 3-in-1 Suction and Vent MountiOttie Easy One Touch Advanced Vent MountAPPS2Car CD Slot MountTECKNET Cup Holder and Vent MountBelkin Magnetic Vent Mount ProZeeHoo Wireless Charging Auto-Clamp
  • GripTie
  • Thick-case fitLISEN Thick-Case Vent Mount · 9.6/10
  • One-hand useBelkin Magnetic Vent Mount Pro · 9.6/10
  • Easy setupAPPS2Car Cup Holder Mount · 9.2/10
  • StabilityAPPS2Car CD Slot Mount · 9.2/10
  • ValueLISEN Thick-Case Vent Mount · 9.6/10
iOttie Easy One Touch Signature
iOttie Easy One Touch Signature
Best Overall
See price
LISEN Thick-Case Vent Mount
LISEN Thick-Case Vent Mount
Best for Thick Cases
See price
Miracase Metal Hook Vent Mount
Miracase Metal Hook Vent Mount
Best Vent Mount
See price
APPS2Car Cup Holder Mount
APPS2Car Cup Holder Mount
Best Cup Holder Mount
See price
VANMASS 3-in-1 Suction and Vent Mount
VANMASS 3-in-1 Suction and Vent Mount
Best Value Suction Mount
See price
iOttie Easy One Touch Advanced Vent Mount
iOttie Easy One Touch Advanced Vent Mount
Best One-Touch Vent Mount
See price
APPS2Car CD Slot Mount
APPS2Car CD Slot Mount
Best for CD Slots
See price
TECKNET Cup Holder and Vent Mount
TECKNET Cup Holder and Vent Mount
Best 2-in-1 Cup and Vent
See price
Belkin Magnetic Vent Mount Pro
Belkin Magnetic Vent Mount Pro
Best for MagSafe iPhones
See price
ZeeHoo Wireless Charging Auto-Clamp
ZeeHoo Wireless Charging Auto-Clamp
Best Wireless Charging Clamp
See price

Which one should you buy?

Find your situation below. That's your pick.

iOttie Easy One Touch Signature
Best Overall
iOttie Easy One Touch Signature
Buy it if:
  • You use a thick or rugged case and want it to just fit
  • You have a flat dash or windshield spot and want one-hand loading
View on Amazon
LISEN Thick-Case Vent Mount
Best for Thick Cases
LISEN Thick-Case Vent Mount
Buy it if:
  • Your case is very bulky and you want a vent mount
  • You want the cheapest mount that still grips well
View on Amazon
Miracase Metal Hook Vent Mount
Best Vent Mount
Miracase Metal Hook Vent Mount
Buy it if:
  • You want the most-reviewed vent mount
  • You have horizontal or vertical vents and a normal phone case
View on Amazon
APPS2Car Cup Holder Mount
Best Cup Holder Mount
APPS2Car Cup Holder Mount
Buy it if:
  • Your car has round vents or no spare vent
  • You want a long arm that brings the phone up to eye level
View on Amazon
VANMASS 3-in-1 Suction and Vent Mount
Best Value Suction Mount
VANMASS 3-in-1 Suction and Vent Mount
Buy it if:
  • You want a dash, windshield and vent option in one box
  • Your case is average thickness (0.55 inches or less)
View on Amazon
iOttie Easy One Touch Advanced Vent Mount
Best One-Touch Vent Mount
iOttie Easy One Touch Advanced Vent Mount
Buy it if:
  • You want a one-touch clamp on a vent, not on the dash
  • You want rubber prongs instead of a metal hook
View on Amazon
APPS2Car CD Slot Mount
Best for CD Slots
APPS2Car CD Slot Mount
Buy it if:
  • Your car has an unused CD slot
  • You want a mount with no suction cup that is safe in hot weather
View on Amazon
TECKNET Cup Holder and Vent Mount
Best 2-in-1 Cup and Vent
TECKNET Cup Holder and Vent Mount
Buy it if:
  • You have a large phone in a thick case and want to use a cup holder
  • You want a vent clip as a backup option
View on Amazon
Belkin Magnetic Vent Mount Pro
Best for MagSafe iPhones
Belkin Magnetic Vent Mount Pro
Buy it if:
  • You have an iPhone with a MagSafe case
  • You want to snap the phone on without opening any arms
View on Amazon
ZeeHoo Wireless Charging Auto-Clamp
Best Wireless Charging Clamp
ZeeHoo Wireless Charging Auto-Clamp
Buy it if:
  • You want wireless charging and a clamp in one mount
  • Your case is thin enough for wireless charging to work
View on Amazon
iOttie Easy One Touch Signature
Our top pick

iOttie Easy One Touch Signature

A one-touch clamp that holds phones and cases of any size, with a telescopic arm for the best viewing angle.

  • Fits cases of any size
  • One-hand loading
  • 5 to 8 inch telescopic arm
BeastScore 93 / 100
View on Amazon

Quick tips before you buy

Measure your case, not your phone

Check the width and thickness with the case on, then compare with the limit on the listing. The clamps on this page stop somewhere between 0.55 and 1.09 inches.

Plan for summer heat

A suction cup on a hot dash can loosen. In a car that sits in the sun, a vent, cup-holder or CD-slot mount is the safer pick.

Keep it clear of airbags and your view

Mount low and to the side, away from the airbag panel and your sight line. Some states limit windshield mounts, so check yours.

Point the vent away in winter

A vent mount puts the phone in the airflow. Use the AC in summer, but aim the heater away so it does not cook the battery.

Quick answers

What is the best car phone mount for thick cases?+

A clamp mount, not a magnet. The iOttie Easy One Touch Signature says its cradle fits cases of any size, and the LISEN says it holds a case up to 1.09 inches thick on a vent. The APPS2Car CD-slot mount takes cases up to 0.8 inches. Measure your case first.

What is the best car phone mount for hot weather?+

A vent, cup-holder or CD-slot mount, because they use no suction cup or adhesive. A suction cup can loosen on a hot dashboard, and the VANMASS listing gives a 194°F limit and says to avoid prolonged direct sunlight. If you want a dash mount, park in shade when you can and clean the surface first.

Will these fit an iPhone 17 Pro Max in a case?+

Yes, in most cases. A Pro Max is roughly 3.1 inches wide before the case. The iOttie vent mount takes up to 3.5 inches wide, the TECKNET up to 3.74 inches, and the APPS2Car cup holder mount names the iPhone 17 Pro Max in its listing. The VANMASS caps phone plus case at 0.55 inches, so skip it for a rugged case.

MagSafe mount or clamp: which is better?+

A clamp is better if you use a thick case or switch phones, since it grips anything. A MagSafe mount like the Belkin is quicker to use, but it needs a MagSafe iPhone or a MagSafe case, and a thick non-MagSafe case will not stay on. Pick the magnet only if your case is MagSafe-ready.

Is a wireless charging car mount worth it?+

Only if you want a clamp and a charger in one. The ZeeHoo says it charges iPhones at up to 7.5W and needs a QC 3.0 car adapter that is not included. Charging through a thick case is weaker, and a cable is usually faster, so buy it for convenience, not speed.

Can a vent mount damage my car’s vents?+

A heavy phone on a thin plastic slat can make it sag, and a bare metal hook can mark soft plastic. The LISEN uses a double-layer metal hook meant to avoid scratches, and the iOttie vent mount adds a support foot against drooping. Round vents do not work with hook mounts: use a cup holder or CD-slot mount instead.

Is it legal to put a phone mount on the windshield?+

It depends on the state. Some US states ban or limit anything fixed to the windshield and allow it only in set corners, and others allow it with a clear view. Check your local rules. A dash, vent, cup-holder or CD-slot mount avoids the question.

Keep comparing